Payment & Shipping Terms:
|Appearance:||White Powder||Usage:||Electronics Chemicals; Disinfectant|
potassium peroxymonosulfate sulfate,
potassium hydrogen persulfate
Potassium Monopersulfate Compound
|Active Component (KHSO5.KHSO4.K2SO4), %||≥99|
|Bulk Density, g/L||800-1200|
|Particle Size Distribution(0.850~0.075mm),%||≥90.0|
|Stability ,active oxygen loss/month, %||≤1.0|
1.Swimming Pool Shock and Spa
Potassium monopersulphate can be added to pool water day or night, and swimming caroal, oxone, virkon can resume after a short waitiong period to allow for adequate mixing and dispersion throughout the pool. No mixing is required; potassium monopersulphate is completely soluble in water and dissolves quickly. Broadcast monopersulphate shock slowly and uniformly over the surface of the water, adding about two-thirds of the total dose over the deep end. Shock with the filter running to ensure complete mixing and good circulation. Potassium monopersulphate is a versatile oxidant. It oxidizes aldehydes to carboxylic acids; in the presence of alcoholic solvents, the esters may be obtained. Internal alkenes may be cleaved to two carboxylic acids, while terminal alkenes may be epoxidized. Thioethers give sulfones, tertiary amine oxides, and phosphines give phosphine oxides. It will also oxidize a thioether to a sulfone with 2 equivalents. With one equivalent reaction can conveniently be stopped at that stage if so desired.
The advantaged to use potassium monopersulphate in swimming pools treatment:
* Maximum disinfection effeciency caused by oxidizing properties.
* Restores water cleanliness and transparency.
* Suitable for all types of swimming poo;s, spas, bathtubs.
* Significantly improves chlorination efficiency through quick oxidization of organic contaminants.
* Very quick action — facility is ready to use after 15 minutes.
* Harmless to swimming pool surfaces, causes no bleaching or discolouration of painted and vinyl-coated surfaces.
* No irritation odour, does not cause allergy as it contains no chloride, aldehydes, alcohol.
* Has no impact on water hardness.
2.Microetching and cleaning of printed wiring/circuit board (PWB)
For PWB industry, microetch solutions used to remove excess graphite and carbon black may be based on hydrogen peroxide or sodium persulfate as the oxidizing agent. For example, a sodium persulphate based product may be combined with sufficient sulfuric acid to make a microetch bath containing 100-300 grams of sodium persulphate per liter of deionized water and about 1% to 10% by weight sulfuric oxideizer, sulfuric acid as one step solution.
Potassium monopersulphate is more commonly known as an oxidizer for wool shrinkproofing treatment. It is in the form of a granule, easily dissolved, and an aqueous solution contains the dissloved oxidizer is stable for storage at a temperature of 32 centigrade. A -S--S- bond is stopped at substantially mono-oxidized state.
4.Odor control agent in waste water treatment
5.Bleach component in denture cleanser and laundry formulations
6.Activator in antimicrobial compositions
7.Other uses where its combination of powerful oxidation and relative
Proper Shipping Name: Corrosive Solid, Acidic, Inorganic N.O.S. (Potassium Peroxymonosulfate)
Class: 8 (CORROSIVE)
UN Number: 3260
EMS: F-A, S-B
Packing: 25kg woven polypropylene bags with inner polyethylene liner (UN approved), or 50kg plastic drums.